SIGN-UP FOR THE MHPS NEWSLETTER! 
When was the last time you thought about your home’s furnace filter? If you haven’t replaced your air filter in a while, now is the time to consider it. Changing mobile home furnace filters is a must on every mobile homeowner’s to-do list. They need to be changed on a regular basis to keep your heating system running correctly and to facilitate airflow through the system into your home.
So, let’s take a closer look at mobile home furnace filters: how often to change them and how to do it.
How Are Mobile Home Furnace Filters Different?
Similar to traditional houses, mobile homes can heat the entire space using gas or electric furnaces. These furnaces are designed to fit into the smaller layout of these homes, using compact ductwork to distribute heat without taking up too much space. Just like full-sized furnaces, they use air filters to remove contaminants and keep air moving through the system correctly.
But there’s a difference with where the filters are located. In many mobile home furnaces, the filters are installed directly at the grill, supplying ventilation to the furnace. This is different from most conventional furnaces, which have filters held in a filter compartment between the furnace and ductwork.
Why Replace Your Furnace Filter?
You might be wondering why it’s so important to change your filter and why the HVAC industry talks about it so much. To understand this, let’s look at how your system works.
How Does Your Mobile Home Furnace System Work?
To warm your home, your system must bring in air and push it back out. If the air doesn’t circulate, the heat produced by the system stays trapped in the furnace and doesn’t warm your home. Your filter is at the start of this process.
The Importance of Your Furnace Filter
The filter removes contaminants from the air before it enters the furnace. This helps protect the inside parts of the system from getting too dirty, which keeps your furnace running smoothly. However, if the filter gets clogged, it blocks airflow. This makes your furnace work harder and use more energy. Not only does this lead to higher energy bills, but it also strains your heating system, which could shorten its lifespan.
A dirty filter can also affect the air quality inside your home. It lets pollutants move around, which can make breathing harder for people with allergies or respiratory problems. That’s why keeping your filters clean is essential for a healthier home.
When Should You Change Your Mobile Home Furnace Filters?
Considering all the advantages, you might wonder how often you should change your filter. Well, it depends on a few things, like how much you use it and what kind of filter you have.
A good rule of thumb is to check it every month and swap it out every 1-3 months, especially during peak heating or cooling seasons. However, if you have allergies or pets, you should change it more often, ideally every 30 to 60 days.
Here are some signs that it’s time to replace your mobile home furnace filter:
- Visible dirt and debris accumulation on the filter
- Reduced airflow from vents
- Your energy bills go up
- People in your home are having more allergies or respiratory issues
Changing Mobile Home Furnace Filters
Replacing the filter in your mobile home furnace is an easy task that only takes a few steps:
- Turn off the power: Switch off the power to your furnace.
- Find the filter: Look for the filter. It is likely installed within the metal grill that supplies furnace ventilation.
- Open the grill: Pop open the grill that holds the filter.
- Take out the old filter: Remove the old filter and dispose.
- Put in the new filter: Slide the new filter into place, following the airflow arrows on the frame.
- Close up: Put the metal grill back and make sure it’s secure.
- Turn the furnace back on: Finally, switch your furnace back on.
Furnace with Filter Compartments
If your furnace has a filter compartment, you’ll need to switch off the power to your unit and open the filter compartment to replace the filter. But you can also:
- Open up: Open the panel to find the blower compartment.
- Dust away: Use a vacuum to gently clean out any dust and debris collected in the chamber.
- Clean the drain: Disconnect and clean the condensation drain tube using a bleach and water solution of a 1:16 ratio. Pour the solution through the tube.Clean the drain port using a soft-bristled brush or pipe cleaner to remove any collected debris.
- Reconnect: Put everything back together.
- Power on: Turn the power back on at the furnace switch and the electrical panel.
By following these simple steps and keeping up with regular filter changes, you’ll keep your mobile home furnace running smoothly and your indoor air clean and comfy for years to come!
Mobile Home Furnace Filters
Maintaining clean furnace filters is essential for optimal HVAC performance and indoor air quality in mobile homes. By understanding the significance of furnace filters, knowing when to replace them, and following simple replacement procedures, mobile homeowners can ensure their heating systems operate efficiently and provide a comfortable living environment year-round. Remember, a small effort in filter maintenance goes a long way in enhancing your mobile home furnace’s overall performance and longevity.
Need help changing or finding the right fit for your mobile home furnace filters? Check out Mobile Home Parts Store‘s wide selection of heating and air parts and supplies.
Tags: filter, furnace filter, mobile home furnace filter, Mobile Home Parts Store
