32" x 74" White Out-Swing Self Storing Storm Door

Dimensions: 31 1/2" Width x 74" Length Jamb Mount - Right or Left Hinge Hang

Standard Features

• Heavy guage all aluminum construction
• 1" thick hollow aluminum door frame reinforced with 14 gauge corner gussets
• Pre-hung and pre-squared with pre-punched frame
• Pre-drilled for latch handle
• Built-in drip cap
• Aluminum kick plate
• 1/8" thick tempered safety glass
• Vertical sliding bottom glass with screen
• Hardware and installation accessories not included
• Made in the USA

This item ships via: LTL Freight

Our Goal is to deliver your purchase in the quickest and most economical way possible. Shipping service and costs are determined by product, weight, package size and ship to destination.

Shipping Rates

To view shipping rates prior to checkout, add the product(s) to the shopping cart. On the My Cart page, click "calculate shipping rates", when the popup appears, enter your state and zip code and click update. The services available for the entire order will appear with the actual cost.

Estimated Arrival Date

• USPS: 3-7 business days after ship date
• UPS Ground: 3-7 business days after ship date
• UPS 3 Day Select: 3 business days after the ship date. Example: If your order is shipped on Monday, your package will arrive on Thursday.
• UPS 2nd Day Air: 2 business days after the ship date. Example: If your order is shipped on Monday, your package will arrive on Wednesday.
• UPS Next Day Air: The next business day after the ship date.
• LTL Freight: 5-7 business days after the ship date.

Order Tracking: In most cases you will receive shipment notification via email. You can also track your order online. For assistance contact us.

Materials needed: 3/4" Putty Tape and Screws.

Optional items that may need replacing: Safety Chain and Storm Door Hardware Kit.

		Taking Measurements 1. Width: Measure outside to outside of the wood jamb. 2. Length: Measure outside of the wood jamb from the top past the threshold to the floor. Note: The width and length measurements must be exact for the door to properly fit on the jamb. 3. To determine if your door is right or left hinged, simply look at the door from the outside to see which side the hinges are on. Note: Storm doors are sized by the wood frame casing (jamb) which fits into the storm door frame. See Image Below
	Installation Instructions 1. Make certain all mounting surfaces (siding seams included) are securely fastened and flat around perimeter of door opening.
	2. Apply a suitable non-hardening sealant tape (Putty Tape or Butyl Tape) to the backside of the door's mounting flange. 3. Do not remove any shipping clips or fasteners and keep the door closed and locked during the installation. Opening the door prior to the installation will destroy the pre-squaring by the manufacturer. 4. Insert the door assembly carefully into the jamb. Make certain the door sill is secure on the floor. Move complete door unit to the hinge side until it is firmly against the stud. 5. Proceed to fasten door with Hex Head Screws. Drive the first 3 screws into the outer pre-punched flange in the middle at the hinge side. Then, drive the next 3 screws in the middle on the lock side. Then, secure the balance of the hinge side, across the sill, up the lock side and the header. 6. Remove the shipping clips and open the door. Install the Storm Door Hardware and Safety Chain. 7. Make sure 2 long screws are installed through the storm door closer bracket fastened to the jamb. This is to anchor the bracket securely to the hinge side stud. 8. If the inner door is secured to the jamb with butt type hinges (some six panel doors), run one long screw through each hinge on the jamb side to penetrate the stud. 9. Some doors will have an adjustable stop. Adjust the stop to the exterior of the inner door to insure a good seal. If these steps are followed, the door will be sealed and operate properly.