32" x 76" Blank Out-Swing Exterior Door

Dimensions: 32" Width x 76" Length Rough Opening - Left or Right Hinge Hang

• White high density polyethylene panels securely bonded to 1 3/8" thick energy efficient polyurethane foam insulation
• Strong welded aluminum frame with integral weather baffle
• Three extruded hinges, complete with stainless steel bushings, join the core to frame
• Bulb Vinyl on all four sides form the primary sealing system. Extruded flap vinyl on all four sides of the frame form a secondary seal
• Adjustable striker plates and pre-drilled for entrance and deadbolt lock
• Pre-hung, pre-squared and pre-punched for fast and easy installation
• Aluminum threshold plate included
• Manufactured to comply with HUD Std 3280-405
• Hardware and installation accessories not included
• Made in the USA

This item ships via: LTL Freight

Our Goal is to deliver your purchase in the quickest and most economical way possible. Shipping service and costs are determined by product, weight, package size and ship to destination.

Shipping Rates

To view shipping rates prior to checkout, add the product(s) to the shopping cart. On the My Cart page, click "calculate shipping rates", when the popup appears, enter your state and zip code and click update. The services available for the entire order will appear with the actual cost.

Estimated Arrival Date

• USPS: 3-7 business days after ship date
• UPS Ground: 3-7 business days after ship date
• UPS 3 Day Select: 3 business days after the ship date. Example: If your order is shipped on Monday, your package will arrive on Thursday.
• UPS 2nd Day Air: 2 business days after the ship date. Example: If your order is shipped on Monday, your package will arrive on Wednesday.
• UPS Next Day Air: The next business day after the ship date.
• LTL Freight: 5-7 business days after the ship date.

Order Tracking: In most cases you will receive shipment notification via email. You can also track your order online. For assistance contact us.

Materials needed: 3/4" Putty Tape and Screws.

Optional items that may need replacing: Safety Chain, Entrance & Deadbolt Combo Lockset.

		Taking Measurements 1. Width: With the door closed, standing on the inside of the home measure between the jambs. 2. Length: With the door closed, standing on the inside of the home measure from the top of the jamb to the floor. For example if your rough opening measures 33 1/2"W x 75 1/2"L you would select the nearest size and order a 34"W x 76"L. Note: This should be the same measurements if you removed the door and measured the rough opening. 3. To determine if your door is right or left hinged, simply look at the door from the outside to see which side the hinges are on. Note: Measuring the door or the frame will result in incorrect sizing.
	Installation Instructions 1. Make certain all mounting surfaces (siding seams included) are securely fastened and flat around perimeter of door opening. 2. Apply a suitable non-hardening sealant tape (Putty Tape or Butyl Tape) to the backside of the door's mounting flange. 3. Do not remove any shipping clips or fasteners and keep the door closed and locked during the installation. Opening the door prior to the installation will destroy the pre-squaring by the manufacturer. 4. Insert the door assembly carefully into the rough opening. Make certain the door sill is secure on the floor. Move door to the hinge side until it is firmly against the stud. 5. Proceed to fasten door with Hex Head Screws. Drive the first 3 screws into the outer pre-punched flange in the middle at the hinge side. Then, drive the next 3 screws in the middle on the lock side. Then, secure the balance of the hinge side, across the sill, up the lock side and the header. 6. Remove the shipping clips and open the door. Install the Locks, Threshold Plate and Safety Chain. 7. Some doors will have an adjustable stop. Adjust the stop to the exterior of the inner door to insure a good seal. If these steps are followed, the door will be sealed and operate properly.